http://www.sellmyproperty.me.uk/refurbish-property/how-do-i-cut-a-vinyl-shower-panel-to-replace-window-in-bathroom.my We buy your property fast! Sun, 25 Jul 2010 20:51:33 +0000 http://wordpress.org/?v=2.8.6 hourly 1 http://www.sellmyproperty.me.uk/refurbish-property/how-do-i-cut-a-vinyl-shower-panel-to-replace-window-in-bathroom.my/comment-page-1#comment-1124 kraemer775 Mon, 28 Jun 2010 10:41:33 +0000 http://www.sellmyproperty.me.uk/refurbish-property/how-do-i-cut-a-vinyl-shower-panel-to-replace-window-in-bathroom.my#comment-1124 To cut the hole in the VINYL panel depending on the thickness you can use a good razor knife or my favorite would be to use a spiral cut saw. Once the hole is cut you will want to run a bead of pure silicone of the same color as the panel around the inside edge to stick the panel to the wall and to waterproof it. I would tape the edges of the panel to the window frame for 24 hours to ensure a tight bond with ample drying time. Trim off any excess silicone with a razor knife. Lastly I would trim out the edges using "VINYL CORNER MOLDING". Apply a bead of silicone to the inside of the corner molding right in the center, Tape it in-place, then use small finish nails to completely secure it. I would leave that tape on for 24 hours also. To cut the hole in the VINYL panel depending on the thickness you can use a good razor knife or my favorite would be to use a spiral cut saw. Once the hole is cut you will want to run a bead of pure silicone of the same color as the panel around the inside edge to stick the panel to the wall and to waterproof it. I would tape the edges of the panel to the window frame for 24 hours to ensure a tight bond with ample drying time. Trim off any excess silicone with a razor knife. Lastly I would trim out the edges using “VINYL CORNER MOLDING”. Apply a bead of silicone to the inside of the corner molding right in the center, Tape it in-place, then use small finish nails to completely secure it. I would leave that tape on for 24 hours also.

]]>